Wearable system for outdoor air quality monitoring in a WSN with cloud computing: Design, validation and deployment.

Breathing poor-quality air is a global threat at the same level as unhealthy diets or tobacco smoking, so the availability of affordable instrument for the measurement of air pollutant levels is highly relevant for human and environmental protection. We developed an air quality monitoring platform that comprises a wearable device embedding low-cost metal oxide semiconductor (MOS) gas sensors, a PM sensor, and a smartphone for collecting the data using Bluetooth Low Energy (BLE) communication. Our own developed app displays information about the air surrounding the user and sends the gathered geolocalized data to a cloud, where the users can map the air quality levels measured in the network. The resulting device is small-sized, light-weighted, compact, and belt-worn, with a user-friendly interface and a low cost. The data collected by the sensor array are validated in two experimental setups, first in laboratory-controlled conditions and then against referential pollutant concentrations measured by standard instruments in an outdoor environment. The performance of our air quality platform was tested in a field testing campaign in Barcelona with six moving devices acting as wireless sensor nodes. Devices were trained by means of machine learning algorithms to differentiate between air quality index (AQI) referential concentration values (97% success in the laboratory, 82.3% success in the field). Humidity correction was applied to all data.

Portable Electronic Nose Based on Digital and Analog Chemical Sensors for 2,4,6-Trichloroanisole Discrimination.

2,4,6-trichloroanisole (TCA) is mainly responsible for cork taint in wine, which causes significant economic losses; therefore, the wine and cork industries demand an immediate, economic, noninvasive and on-the-spot solution. In this work, we present a novel prototype of an electronic nose (e-nose) using an array of digital and analog metal-oxide gas sensors with a total of 31 signals, capable of detecting TCA, and classifying cork samples with low TCA concentrations (≤15.1 ng/L). The results show that the device responds to low concentrations of TCA in laboratory conditions. It also differentiates among the inner and outer layers of cork bark (81.5% success) and distinguishes among six different samples of granulated cork (83.3% success). Finally, the device can predict the concentration of a new sample within a ±10% error margin.